Solid Oak Stair Cladding Landing Tread 1000mm x 100mm

Solid Oak Stair Cladding Landing Tread 1000mm x 100mm
Solid Oak Stair Cladding Landing Tread 1000mm x 100mm Solid Oak Stair Cladding Landing Tread 1000mm x 100mm Solid Oak Stair Cladding Landing Tread 1000mm x 100mm
Brand: Oak Ledged Doors Ltd
Product Code: Oak Stair Cladding
Availability: In Stock
Price: £24.00
Ex Tax: £20.00
Qty:     - OR -   Add to Wish List
Add to Compare

Solid Oak Landing Tread 1000mm x 100mm

Used on the top landing to join the solid oak stair cladding to your choice of flooring

The solid oak landing tread is supplied 20mm thick to match 20mm flooring.

We can manufacture a top tread to suit any thickness of flooring - Please specify what thickness you require or we will supply at 20mm thick

Our Solid Oak Stair Cladding Treads and Risers are manufactured in the UK from solid White Oak. There are no joins in either the Tread or the Riser; both are manufactured from one solid piece of oak. These are not engineered boards

The stair cladding treads and risers are supplied in the dimensions below, simply cut the boards to size and stick them over your existing stair steps using a flexible polymer adhesive.

Solid Oak Stair Cladding Dimensions

  • Solid Oak Stair Cladding Landing Treads 20mm x 1000mm x 100mm

You need to determine what flooring you are putting on your top landing

Carpet - If you are having carpet on your top landing then you bring the carpet over the front nose of your very top tread and start your stair cladding with a riser under your top nosing covered in carpet - You will not need a landing tread

Oak Ledged Door Solid Oak Flooring - If you are covering your top landing with our solid Oak Flooring then apply a tread to the top landing and butt the flooring to it 

Engineered Flooring or Laminate - If you are covering your landing with a wooden or laminate floor then we can supply a narrow top landing tread manufactured to your thickness of flooring. Remember that most laminate flooring and engineered flooring require underlay that increases the overall thickness of the floor. Your flooring can then be butted up to the narrow top landing tread supplied

The Solid Oak Stair Cladding is supplied smooth and unfinished ready for you to apply an Oil, Varnish or Lacquer finish to your cladding. We suggest you apply a first, sealing, coat to your cladding before installation and then a top finishing coat after installation


We recommend that you start installing the Stair Cladding at the top of your stairs. Measure and cut all of your treads & risers to size and then apply your first coat of finish.

Measure the protrusion of your existing stair nosing from the face of the existing riser on the underside of the tread to the very front of the nosing. This will give you the dimension for your riser packers. Cut and screw your packers into place.

Starting at the top of your stairs, stick your top tread into place using Polymer Adhesive. The riser is pushed up into the groove on the bottom edge of the tread and stuck to the packer with polymer adhesive. The next tread is pushed up to the first riser and the sequence is repeated all the way down your staircase.

Once the adhesive has dried you can then apply your top coat of finish



Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Powered By OpenCart
Oak Ledged Door Company Ltd © 2021